This text is a continuation to my Chia plotting & farming information. If you happen to haven’t already, try half 2 the place I discuss in regards to the finest {hardware} for plotting, and subsequent half 3 the place I speak about the perfect farming {hardware}.
Now that your Chia plotting rig is prepared, it’s time to arrange the plotter software program and begin incomes your first Chia cash. In case you have checked my earlier guides, you’ll have an concept on what sort of outcomes to count on.
Obtain Chia Pockets, Setup & Backup
Very first thing first let’s obtain & set up Chia GUI from official web site right here: https://www.chia.web/obtain/ (all the time double test when you obtain from official sources), be sure you backup & save seed phrase in a secure location like:
One other advice to keep secure is to farm to a chilly pockets immediately. Create your plots and farm with one pockets/seed phrase however ship the rewards to a special one (chilly pockets) by altering your farming rewards goal deal with in Chia GUI Pockets, right here is how:
- Open Chia GUI and go to “Farm” tab
- Then click on on the 3 dots from high proper
- Go to “Handle Farming Rewards“
- There exchange each deal with with the one the place you wish to obtain the rewards
- Completed 🙂
Finest Chia Plotter Software program
Similar to most customers, I first began plotting with the at present standard SWAR plotter, plotting 8 in parallel with my present configuration from right here. Later, I moved on to PSChiaPlotter. Whereas PSChiaPlotter is a good piece of software program, I quickly found madMAx43v3r plotter, and I’m now at present utilizing it as a result of it offers the perfect outcomes by far. Right here’s why.
The MadMAx43v3r Chia Plotter permits me to work on one plot at a time (serial plotting) at an unbelievable pace. If assign 16 threads to the plotter, I obtain a report breaking pace of 29 minutes per plot. If I open one other occasion of the plotter and cut up the threads and RAM between each cases, I’m able to have two plots each 55 minutes (a median of 26 minutes per plot).
Tips on how to use the madMAx43v3r Chia Plotter:
If you’re new to plotting and never reploting for swimming pools then utilizing madMax software program is greater than sufficient, test the tutorial beneath. For re-ploting skip this part.
Notice: to duplicate my outcomes, you have to make use of two high-speed SSD drives with MLC NAND. This information received’t provide the marketed outcomes if in case you have a bottleneck in your plotting rig.
- Obtain the plotter from right here and unzip it in your desktop.
- Proper click on on “plot_with_log.cmd” (is sweet to have logs) and edit it.
- Right here is how my present instructions seems like and i’ll clarify every of them:
@ECHO OFF
SET hr=%time:~0,2%
IF "%hr:~0,1%" equ " " set hr=0percenthr:~1,1%
SET DATETIME=Log_percentdate:~-4,4%%date:~-10,2%%date:~-7,2percent_percenthr%%time:~3,2%%time:~6,2%
SET LOG_FILE=logs/%DATETIME%.log
IF NOT EXIST logs MKDIR logs
powershell ".chia_plot.exe -t E: -2 G: -d D:CHIA -r 16 -u 512 -v 128 -n 1 -c poolkey -f farmerkey | tee '%LOG_FILE%'"
PAUSE
- From all that code we’ll concentrate on this line solely:
powershell ".chia_plot.exe -t E: -2 G: -d D:CHIA -r 16 -u 512 -v 128 -n 27 -c poolkey -f farmerkey | tee '%LOG_FILE%'"
- “-t E:” is my first nvme ssd for momentary plotting which is WD_Black SN750 1TB (-t, –tmpdir arg Non permanent listing, wants ~220 GiB (default = $PWD)) <tmpdir> wants about 220 GiB area, it can deal with about 25% of all writes. (Examples: ‘./’, ‘/mnt/tmp/’)
- “-2 G:” is my second nvme ssd for momentary plotting which is WD_Black SN750 1TB (-2, –tmpdir2 arg Non permanent listing 2, wants ~110 GiB [RAM] (default = <tmpdir>)) <tmpdir2> wants about 110 GiB area and ideally is a RAM drive, it can deal with about 75% of all writes. Mixed (tmpdir + tmpdir2) peak disk utilization is lower than 256 GiB. I assigned every of my plotting SSD’s to every momentary listing: “-t E: -2 G:”. Because of this my quickest and most sturdy SSD is -tmpdir2, and it handles 75% of the writing. The second, cheaper SSD is assigned to –tempdir, and it’s principally there to stop write pace bottlenecks.
- “-d D:CHIA” i’ve the present energetic farming HDD like Seagate Exos or Western Digital below –finaldir. That’s the place the finished plots are being saved to (-d, –finaldir arg Ultimate listing (default = <tmpdir>))
- “-r 16” I assign as much as 16 threads per plot, cpu which is a Ryzen 9 3950x. Do discover that –r merely limits the utmost quantity of threads that can be utilized per plot. It doesn’t lock these threads to that process alone. Any –r worth greater than 16 proved to not change something. At the very least on my rigs. (-r, –threads arg Variety of threads (default = 4))
- “-u 512” pahse one buckets (P1) 512 (-u, –buckets arg Variety of buckets (default = 256))
- “-v 128” section tree + 4 128 (P3+P4) (-v, –buckets3 arg Variety of buckets for section 3+4 (default = buckets)) this plotter lets you enhance the bucket quantity previous 128. I set mine to “-u 512 -v 128”. Mixed with –r 16, this improved efficiency tremendously.
- “-n 27” what number of plots to create with the present run, in my case 27 plots to be created for a 3TB HDD (-n, –rely arg Variety of plots to create (default = 1, -1 = infinite))
- “-c POOLKEY” right here can be added your key for swimming pools. Right here is how yo get the pool key: Run PowerShell and write “chia plotnft present” then search for “P2 singleton deal with (pool contract deal with for plotting)” and replica it.
- “-f FARMERKEY” Right here is tips on how to get the farmer key: In the identical PowerShell terminal write “chia keys present” and replica the important thing the place it says “Farmer public key“.
- We’re prepared to start out creating the primary plots, run “plot_with_log.cmd” and it’ll start the plotting creation course of
- have enjoyable! 🙂
My outcomes with 16 threads:
Whole plot creation time was 1699.33 sec (28.3221 min)
Plotting with two madMax cases
As I discussed earlier, you possibly can run two cases of this plotter in parallel with diminishing returns. On a rig with 32 CPU threads and 32GB RAM, the plot creation time goes from 28 minutes to 55 minutes per occasion, per plot. Because of this every plot takes a median of 25 minutes to create.
- Plot 1: 3095.17 sec (51.5862 min)
- Plot 2: 3114.45 sec (51.9075 min)
- whole time per plot: 25.8734 min
Tips on how to rePlot for Swimming pools w/ PSChiaPlotter & MadMax
Now that official swimming pools are stay, we have now to replot once more for moveable plots (also referred to as pool plots). If you have already got fairly a number of plots being farmed on, re-plotting can be successful to your efficiency till all of them are transformed.
There’s a strategy to mitigate that, although. If you happen to use the PSChiaPlotter at the side of the madMAx43v3r plotter, you possibly can re-plot nearly seamlessly.
Large shootout to NotAnotherTech Channel for making this potential.
With this duo, you possibly can nonetheless solo farm with all your previous plots, even these which can be about to get deleted.
All it’s important to do is configure the Replot operate within the PSChiaPlotter to make use of the madMax plotter.
In any other case, you would need to delete a number of plots to make room for the brand new ones, which means that you just’d have fewer plots farming throughout the re-plotting course of.
Or, when you use the PSChiaPlotter alone, you’d lose on the additional pace madMAx43v3r can present.
There is no such thing as a want for me to make a step-by-step tutorial for this as a result of NotAnotherTech Channel did it completely and that i had nothing else so as to add, anyway if in case you have questions let me know. Right here is how it’s best to do it:
Disclaimer: This isn’t monetary advise, I’m not a monetary advisor, that is for academic functions solely. If you wish to put money into cryptocurrency please do your individual analysis and make investments at your individual danger, 1stMiningRig is rarely chargeable for any choices you make. 1stMiningRig could obtain donations or sponsorships in affiliation with sure content material creation. 1stMiningRig could obtain compensation when affiliate/referral hyperlinks are used.
Thanks for studying. As all the time, your feedback, ideas and questions are welcome.
Subscribe and keep tuned for additional updates!
