To start with, this EA alerts (if choice checked) when an emblem enters into a variety section. Then, it can watch for breakout of the vary (with extra filters if wanted) to ship an alert and/or to open an order. The principle benefit of this EA is that it permits you to customise the specs of your vary.
To do that, you outline the three following parameters:
- ‘Timeframe for bars calculation‘: the min vary size can be calculated on this Timeframe.
- ‘Min vary size in bars‘: the worth should not go outdoors the vary throughout this minimal of bars.
- ‘Max vary dimension in pips‘: the worth should transfer inside this worth vary.
You can too outline the breakout distance by giving a worth to the ‘Minimal breakout distance in pips‘ parameter: a breakout happens when the worth crosses a minimal distance from the vary.
The 4 parameters talked about above seem in blue within the graph beneath:
Then, the opposite benefits of this EA are:
- It may possibly mechanically place Cease Loss on the opposite facet of the vary when an order is opened.
- It consists of extra filters (transferring common, Pivot Factors, different filters will be carried out on demand).
- It has an entire administration of orders (break even, trailing cease, closing earlier than weekend, max misplaced/day …).
- It may possibly work with all market watch symbols without delay.
-====Common settings====-
Symbols: symbols for alerts & buying and selling (all or image on the chart)
There are a number of prospects to decide on which symbols needs to be scanned:
– ‘Solely image on the chart’ : it is best to use this selection for backtests or if you wish to apply the bot on the chart image ;
– ‘All main foreign exchange pairs’ : the bot will scan all 28 main foreign exchange pairs (EUR/USD/GBP/CHF/AUD/NZD/JPY) ;
– ‘Market watch’ : the bot will scan all market watch symbols ;
– ‘Solely symbols listed beneath’ : solely symbols listed within the area beneath can be scanned
Symbols to scan or exclude: write right here symbols to scan (‘Solely symbols listed beneath’ mode) or to exclude (‘All main foreign exchange pairs’ and ‘Market watch’ mode)
Dealer prefix (if obligatory): just for brokers who use prefixes. For instance, sort m for mEURUSD
Dealer suffix (if obligatory): just for brokers who use prefixes. For instance, sort m for EURUSDm
If a number of symbols have to be entered on this area, they have to be separated by commas
Use Timer: outline buying and selling days and hours
Monday: alerts & buying and selling on Mondays
Tuesday: alerts & buying and selling on Tuesdays
Wednesday: alerts & buying and selling on Wednesdays
Thursday: alerts & buying and selling on Thursdays
Friday: alerts & buying and selling on Fridays
Saturday (crypto): alerts & buying and selling on Saturday (usually for crypto buying and selling)
Sunday (crypto): alerts & buying and selling on Sunday (usually for crypto buying and selling)
Begin time: begin of the session
Finish time: finish of the session
Indicators alerts: terminal and/or smartphone notifs
Sends an alert when a variety is detected.
Buying and selling alerts: terminal and/or smartphone notifs
Sends an alert when a variety break is detected.
-====Vary settings====-
Timeframe for bars calculation: all MT4 timeframes
Used for ‘Min vary size in bars’: the variety of bars can be calculated on this timeframe.
Min vary size in bars: min variety of bars to validate the vary
If the worth stays inside the vary dimension (in pips, factors…) for x bars or extra, the vary is validated.
Max vary dimension in pips, factors…: (Max worth – Min worth) have to be <= Max vary (throughout min vary size)
Minimal breakout distance in pips, factors…: the breakout is validated when the worth goes out of the vary and reaches a minimal distance
-====Filters settings====-
-=Shifting common settings=-
Use a MA: checks if worth is above (purchase sign) or beneath (promote sign) this MA
Ma timeframe: all MT4 timeframes
Ma interval: interval of the MA
Ma methodology: SMA / EMA / SMMA / LWMA
Ma utilized worth: CLOSE / OPEN / HIGH / LOW / MEDIAN / TYPICAL / WEIGHTED
-=RSI settings=-
Use RSI: checks RSI worth earlier than opening an order
RSI Timeframe: all MT4 timeframes
RSI interval: interval of the RSI filter
RSI utilized worth: CLOSE / OPEN / HIGH / LOW / MEDIAN / TYPICAL / WEIGHTED
RSI shift: shift of the RSI filter
Min RSI worth for a purchase order: purchase order is opened if RSI > this worth
Max RSI worth for a promote order: promote order is opened if RSI < this worth
-=Pivot factors settings=-
Every day PP: checks if worth is above (purchase sign) or beneath (promote sign) every day PP
Weekly PP: checks if worth is above (purchase sign) or beneath (promote sign) weekly PP
Month-to-month PP: checks if worth is above (purchase sign) or beneath (promote sign) month-to-month PP
Notice: the extra filters carried out, the less orders can be opened. When you discover that there aren’t sufficient open orders, strive disabling some filters.
-====Buying and selling settings====-
-=Common settings=-
Enable buying and selling: if false, solely alerts are operational
Magic quantity: have to be distinctive if different EA are operating
‘Max open orders’, ‘Max % misplaced/day’ and ‘Max % win/day’ are calculated from the magic quantity. For instance, in case you have 3 EAs with the identical magic quantity, the full variety of orders opened would be the sum of the orders opened in these 3 EAs.
Max open orders: max variety of orders opened concurrently (if 0, no max)
Max misplaced/day (in % of fairness): if max worth is reached, the EA open orders are closed and no different order is opened till the subsequent day (if 0, no max)
The calculation is predicated on fairness and never stability. With a view to velocity up the backtests, the calculation is completed each hour throughout backtests, as an alternative of each minute for an actual buying and selling session.
Max win/day (in % of fairness): if max worth is reached, the EA open orders are closed and no different order is opened till the subsequent day (if 0, no max)
Similar comment than for ‘Max misplaced/day (in % of fairness)’.
Max drawdown (in % of fairness): if max worth is reached, the EA open orders are closed and the EA is closed (if 0, no max)
Similar comment than for ‘Max misplaced/day (in % of fairness)’, however the calculation is completed each 5 minutes (for backtests and actual buying and selling periods).
Shut orders earlier than weekend: shut all EA orders on Friday
Closing time earlier than weekend: if ‘Shut orders earlier than weekend’ is ‘true’
Use cash administration: if ‘true’, lot dimension in % stability
Mounted heaps dimension: lot dimension per order (if ‘Use cash administration’ is ‘false’)
Lot dimension in %: % stability per order (if ‘Use cash administration’ is ‘true’)
Max unfold: max allowed unfold to open an order (if 0, no max unfold)
Warning: if the worth of the unfold is just too low, no order can be opened! To keep away from any downside, it is suggested to set the worth ‘0’ for the backtests.
Max slippage: max allowed slippage to open an order
-=SL & TP settings=-
Place SL above/beneath vary: If ‘purchase order’, SL is positioned beneath vary; if ‘promote order’, SL is positioned above vary
A number of of SL for take revenue: cease loss distance is multiplicated by x for take revenue distance (if ‘Place SL above/beneath vary’ is ‘true’)
SL in pips, factors…: cease loss in pips, factors… (if ‘Place SL above/beneath vary’ is ‘false’)
TP in pips, factors…: take revenue in pips, factors… (if ‘Place SL above/beneath vary’ is ‘false’)
-=BE/TS/Grid settings=-
Break even: if ‘true’, break even is activated
Break even revenue in pips, factors…: triggers the break even from a sure revenue in pips, factors…
Trailing cease: if ‘true’, trailing cease is activated
Path revenue in pips, factors…: triggers the trailing cease from a sure revenue in pips, factors…
Path distance in pips, factors…: distance in pips, factors… between trailing cease and worth
Path step in pips, factors…: step in pips, factors… for the trailing cease
Open extra orders: an extra order is opened every time the revenue reaches a step
Max extra orders (by image) : ‘Open extra orders’ have to be ‘true’
It’s higher to have smaller heaps than for foremost orders.
It’s higher to have smaller heaps than for foremost orders.
Revenue step in pips, factors… to open an extra order: every time the revenue reaches this step, a brand new order is opened
SL in pips, factors… of extra orders: SL in pips, factors… of the extra orders
TP in pips, factors… of extra orders: TP in pips, factors… of the extra orders
- Earlier than utilizing the ‘All main foreign exchange pairs’ mode, confirm that the 28 main forex pairs are current within the “Market Watch” tab of MT4.
- It’s endorsed to make use of multi-symbol mode for alerts solely. When a worthwhile methodology is discovered on an emblem, it’s higher to use it in ‘only_symbol_on_the_chart’ mode.
- The EA works for all sorts of symbols however in some instances (relying on the dealer), variations on SL and TP should be accomplished with sure varieties of symbols (aside from foreign exchange and indices). On this case, settings in pips or factors should be multiplied by 10 to match the proper worth. Instance: for a cease lack of $10 on the Oil image the ‘SL in pips, factors…’ parameter should take the worth 100 and never 10 (x10). Assessments will be carried out in backtest to search out the best worth.
Main foreign exchange pairs :
EURUSD / GBPUSD / USDCHF / AUDUSD / USDCAD / USDJPY / NZDUSD
EURGBP / EURCHF / EURAUD / EURCAD / EURJPY / EURNZD
GBPCHF / GBPAUD / GBPCAD / GBPJPY / GBPNZD
AUDCHF / CADCHF / CHFJPY / NZDCHF
AUDCAD / AUDJPY / AUDNZD
CADJPY / NZDCAD
NZDJPY